GME MARINE RADIO VHF GX720AD WITH AIS & NMEA 2000
Available to order for collect — supplier, typically 2–10 business days
The GME GX720AD AIS VHF DSC Fixed Mount Transceiver is the GX710D with an AIS receiver and NMEA 2000 added, forming the top of GME's fixed mount range. Transmission is 25 watts across all marine VHF channels, switching down to 1 watt for close range or in-harbour use. Class D DSC is paired with an integrated dual-receiver GPS module, so a distress call carries the vessel's position automatically without an external GPS feed or an additional wiring run. Dual watch, triple watch and programmable scan are standard. The built-in dual-channel AIS receiver lets the vessel see AIS-equipped traffic around it directly on a connected plotter, and NMEA 2000 sits alongside NMEA 0183 for a clean drop into a modern network rather than a legacy point-to-point wiring run. The front panel carries an IP67 ingress rating, and the large backlit display stays legible in direct sunlight at the helm. A double-conversion superheterodyne receiver and 10 watt audio output into a 4 ohm speaker keep transmissions clear over engine and wind noise, while a compass-safe distance of 1.0 m simplifies mounting near steering compasses. Suited to offshore and coastal boats, and to any customer already running an NMEA 2000 backbone. Against the GX710D, the NMEA 2000 connectivity is as much a differentiator as the AIS receiver, worth leading with on a repower or refit. Features: 25/1 watt switchable transmit power Class D DSC with integrated dual-receiver GPS Built-in dual-channel AIS receiver Voltage: 13.8V DC Large, bright LCD display IP67 rated front panel Dual watch, triple watch and programmable scan NMEA 0183 and NMEA 2000 connectivity Double-conversion superheterodyne receiver 10W audio output 3 year warranty Supplied with microphone and flexible lead, power lead and mounting hardware Note: DSC will not function until an MMSI has been programmed into the unit. Power Output High 25W / Low 1W Voltage 13.8V DC Current Draw (Stdby / TX / RX) 0.5A / 5A / 1A Current Draw (TX High / Mid / Low) \u22643.2A / \u22642A / \u22641.2A Transmit Frequency 156.025 - 157.425 MHz Receive Frequency 156.300 - 162.250 MHz Channel Spacing 25 kHz DSC Class D, dual receiver (individual CH70) AIS Receiver Dual channel NMEA 0183 & 2000 Ingress Protection IP67 (front panel) Operating Temperature -15\u00b0C to +55\u00b0C Audio Output Power 10W @ 4\u03a9 Dimensions L x W x H (mm) 155 x 60 x 40 Weight 285 g Warranty 3 Years
$598.99
Not all goods are kept in store; some come direct from the supplier so it could take multiple business days to arrive in store.
Click & collect: goods from JPW, RWB and Taylor Marine are typically ready in 2–5 business days. Goods from Sam Allen (east coast) are typically ready in 5–10 business days.
The GME GX720AD AIS VHF DSC Fixed Mount Transceiver is the GX710D with an AIS receiver and NMEA 2000 added, forming the top of GME's fixed mount range. Transmission is 25 watts across all marine VHF channels, switching down to 1 watt for close range or in-harbour use. Class D DSC is paired with an integrated dual-receiver GPS module, so a distress call carries the vessel's position automatically without an external GPS feed or an additional wiring run. Dual watch, triple watch and programmable scan are standard. The built-in dual-channel AIS receiver lets the vessel see AIS-equipped traffic around it directly on a connected plotter, and NMEA 2000 sits alongside NMEA 0183 for a clean drop into a modern network rather than a legacy point-to-point wiring run. The front panel carries an IP67 ingress rating, and the large backlit display stays legible in direct sunlight at the helm. A double-conversion superheterodyne receiver and 10 watt audio output into a 4 ohm speaker keep transmissions clear over engine and wind noise, while a compass-safe distance of 1.0 m simplifies mounting near steering compasses. Suited to offshore and coastal boats, and to any customer already running an NMEA 2000 backbone. Against the GX710D, the NMEA 2000 connectivity is as much a differentiator as the AIS receiver, worth leading with on a repower or refit. Features: 25/1 watt switchable transmit power Class D DSC with integrated dual-receiver GPS Built-in dual-channel AIS receiver Voltage: 13.8V DC Large, bright LCD display IP67 rated front panel Dual watch, triple watch and programmable scan NMEA 0183 and NMEA 2000 connectivity Double-conversion superheterodyne receiver 10W audio output 3 year warranty Supplied with microphone and flexible lead, power lead and mounting hardware Note: DSC will not function until an MMSI has been programmed into the unit. Power Output High 25W / Low 1W Voltage 13.8V DC Current Draw (Stdby / TX / RX) 0.5A / 5A / 1A Current Draw (TX High / Mid / Low) \u22643.2A / \u22642A / \u22641.2A Transmit Frequency 156.025 - 157.425 MHz Receive Frequency 156.300 - 162.250 MHz Channel Spacing 25 kHz DSC Class D, dual receiver (individual CH70) AIS Receiver Dual channel NMEA 0183 & 2000 Ingress Protection IP67 (front panel) Operating Temperature -15\u00b0C to +55\u00b0C Audio Output Power 10W @ 4\u03a9 Dimensions L x W x H (mm) 155 x 60 x 40 Weight 285 g Warranty 3 Years
- SKU: JPW88249
- Vendor: JPW Marine
YOU MAY ALSO LIKE
VIEW MORE
TRUSTED FISHING & BOATING BRANDS
Continuously scrolling list of 66 trusted brands.