Hillarys Boat & Tackle
Pull Up Cleats 175mm

PULL UP CLEATS 175MM

Available to order for collect — supplier, typically 2–10 business days

Our pull-up cleats provide a low-profile mooring point that sits close to the deck when not in use. The lifting section pulls up from its base when a line needs to be made off and presses back down afterwards, leaving a clear deck with nothing to catch lines or feet. Three finishes are available: silver anodised aluminium, black anodised aluminium and mirror polished 316 stainless steel. All three share the same dimensions. The 175mm lifting section sits on a 223mm overall base plate with a top-down width of 37mm. Closed height is 17mm, rising to 44mm when open and leaving a 29mm gap under the lifting section to pass a line through. Countersunk holes in the base plate allow a neat fastening finish, with a 7mm drill hole. The two 24mm diameter legs extend 57mm below the base plate, so check the clearance beneath the mounting surface before fitting. Features: Pull-up cleat that sits low and clear of the deck when closed Closed height 17mm, open height 44mm 29mm gap under the lifting section when open Available in anodised aluminium, black anodised aluminium and mirror polished 316 stainless steel 223mm overall length with a 175mm lifting section Countersunk fastening holes 7mm drill hole Two 24mm diameter legs, 57mm long Part No. JPW19331 JPW19332 JPW19333 Material Aluminium Aluminium 316 Stainless Steel Finish Anodised Black Anodised Mirror Polish Drill Hole Diameter (mm) 7

SIZE

▾

$252.94

Not all goods are kept in store; some come direct from the supplier so it could take multiple business days to arrive in store.

Click & collect: goods from JPW, RWB and Taylor Marine are typically ready in 2–5 business days. Goods from Sam Allen (east coast) are typically ready in 5–10 business days.

Our pull-up cleats provide a low-profile mooring point that sits close to the deck when not in use. The lifting section pulls up from its base when a line needs to be made off and presses back down afterwards, leaving a clear deck with nothing to catch lines or feet. Three finishes are available: silver anodised aluminium, black anodised aluminium and mirror polished 316 stainless steel. All three share the same dimensions. The 175mm lifting section sits on a 223mm overall base plate with a top-down width of 37mm. Closed height is 17mm, rising to 44mm when open and leaving a 29mm gap under the lifting section to pass a line through. Countersunk holes in the base plate allow a neat fastening finish, with a 7mm drill hole. The two 24mm diameter legs extend 57mm below the base plate, so check the clearance beneath the mounting surface before fitting. Features: Pull-up cleat that sits low and clear of the deck when closed Closed height 17mm, open height 44mm 29mm gap under the lifting section when open Available in anodised aluminium, black anodised aluminium and mirror polished 316 stainless steel 223mm overall length with a 175mm lifting section Countersunk fastening holes 7mm drill hole Two 24mm diameter legs, 57mm long Part No. JPW19331 JPW19332 JPW19333 Material Aluminium Aluminium 316 Stainless Steel Finish Anodised Black Anodised Mirror Polish Drill Hole Diameter (mm) 7

TRUSTED FISHING & BOATING BRANDS

International Protective Coatings
Altex Coatings
Norglass
Diggers
Pacer Automotive
Septone
Mirka
Indasa
Unipro
3M
Dan Fender
IMAR
Ranex
Fixtech
Propspeed
Gulf Western Oil
Penrite
INOX
HoseCoil
Shurhold
JABSCO
Relaxn
Rule
Seaflo
Whale
Robline
Atlantic Trailer Winches
Axis Life Jackets
Shimano
Ronstan
Gill Marine
Delta Anchors
Fusion
Raymarine
GME
Delkor
iCom
Harden
Uniden
Yeti
NomadiQ
Oceansouth
Sicut
Victorinox
Dick
Vexed
Mustad
Nomad Design
Halco
Ocean's Legacy
Shogun
Daiwa
Insalt
Penn
Just Teak
Yamashita
Harimitsu
Surecatch
Jinkai
Black Magic
Sufix
Richter
Owner
Bassday
Kazura
Bird Busta

Continuously scrolling list of 66 trusted brands.

Pull Up Cleats 175mm | Hillarys Boat & Tackle