SHURFLO PRO BAITMASTER II LIVEWELL PUMP WITH FITTINGS 4GPM 12V
Available to order for collect — supplier, typically 2–10 business days
Shurflo Pro Baitmaster™ II pump has been created with unique over-molded single-piece diaphragm, assuring long life and top performance in all livewell or deck wash down plumbing systems. This pump is quiet, thermally protected and can run dry without damage. Designed to handle the harsh marine environment, the Pro Baitmaster™ II motor is protected by an integral thermal breaker. The pressure switches are sealed and the motors are finished with Electro-coating to inhibit corrosion. It can be mounted in an environment where "splashed water" may be present as it is enclosed to prevent incidental moisture from entering; however, this pump is not submersible. The Pro Baitmaster™ II pump delivers water on demand. With the output side closed (valve off) the pump will turn off, and as the valve is opened the pressure within the output side drops. Once the pressure drops below a pre-determined point the pressure switch closes and the pump turns on. If the output side is wide open the pump operates continuously. When the valve is partially opened the pump may cycle ON/OFF (intermittent duty) as it is able to pressurize faster than the water is being released. This pump includes 2x 3/4" hose barb fittings, 1x 3/4" GHT fitting and an inlet strainer to prevent debris from entering the pump. Features: Livewell or Wash Down application General water transfer Includes fittings and mesh strainer 4 independent chambers Co-Molded diaphragm Adjustable pressure switch Self-priming up to 6 feet Sealed switch & motor Corrosion resistant electro-coated motor For tank size 35 gallons and under Thermally protected, Ignition protected, CE 2 year warranty For more specifications, download the manual or data sheets found under the "Downloads" tab. JPW Voltage Flow Rate (Gallons per minute) Flow Rate (Litres per minute) Amps Shut-off Pressure JPW3535 12V 4 GPM 15.1 LPM 8 45 PSI (3.1 BAR) Warranty Notes: Never use Teflon tape or sealing compounds on SHURFLO pump threads or fittings. Sealer may enter the pump causing a failure and will NOT be covered under warranty.
$515.96
Not all goods are kept in store; some come direct from the supplier so it could take multiple business days to arrive in store.
Click & collect: goods from JPW, RWB and Taylor Marine are typically ready in 2–5 business days. Goods from Sam Allen (east coast) are typically ready in 5–10 business days.
Shurflo Pro Baitmaster™ II pump has been created with unique over-molded single-piece diaphragm, assuring long life and top performance in all livewell or deck wash down plumbing systems. This pump is quiet, thermally protected and can run dry without damage. Designed to handle the harsh marine environment, the Pro Baitmaster™ II motor is protected by an integral thermal breaker. The pressure switches are sealed and the motors are finished with Electro-coating to inhibit corrosion. It can be mounted in an environment where "splashed water" may be present as it is enclosed to prevent incidental moisture from entering; however, this pump is not submersible. The Pro Baitmaster™ II pump delivers water on demand. With the output side closed (valve off) the pump will turn off, and as the valve is opened the pressure within the output side drops. Once the pressure drops below a pre-determined point the pressure switch closes and the pump turns on. If the output side is wide open the pump operates continuously. When the valve is partially opened the pump may cycle ON/OFF (intermittent duty) as it is able to pressurize faster than the water is being released. This pump includes 2x 3/4" hose barb fittings, 1x 3/4" GHT fitting and an inlet strainer to prevent debris from entering the pump. Features: Livewell or Wash Down application General water transfer Includes fittings and mesh strainer 4 independent chambers Co-Molded diaphragm Adjustable pressure switch Self-priming up to 6 feet Sealed switch & motor Corrosion resistant electro-coated motor For tank size 35 gallons and under Thermally protected, Ignition protected, CE 2 year warranty For more specifications, download the manual or data sheets found under the "Downloads" tab. JPW Voltage Flow Rate (Gallons per minute) Flow Rate (Litres per minute) Amps Shut-off Pressure JPW3535 12V 4 GPM 15.1 LPM 8 45 PSI (3.1 BAR) Warranty Notes: Never use Teflon tape or sealing compounds on SHURFLO pump threads or fittings. Sealer may enter the pump causing a failure and will NOT be covered under warranty.
- SKU: JPW3535
- Category: Pumps
- Vendor: JPW Marine
TRUSTED FISHING & BOATING BRANDS
Continuously scrolling list of 66 trusted brands.