Hillarys Boat & Tackle
Victron Smart IP43 Charger 12V 30A (1+1)

VICTRON SMART IP43 CHARGER 12V 30A (1+1)

Available to order for collect — supplier, typically 2–10 business days

The Victron Smart IP43 Charger 12/30 (1+1) 120-240V is an adaptive, intelligent battery charger with built-in Bluetooth. It delivers up to 30A to a 12V battery from the main output, with a second isolated output of up to 4A for a starter battery. Two isolated outputs An integrated FET battery isolator and isolated outputs let one charger charge two separate batteries at different voltages or states of charge, with no current flow between them. The main output can supply the full rated current. The starter output is limited to 4A, and the combined current of both outputs is limited to the rated 30A. One charge algorithm applies to both outputs, so both batteries should be the same chemistry type. Adaptive 6-stage charging Microprocessor controlled adaptive charging optimises each recharge for the battery and the way it is used. Charge modes for flooded lead-acid, AGM, Gel and LiFePO4 batteries are selected with the MODE button on the charger or in the VictronConnect app, and charge voltage is compensated automatically for temperature (not needed in Li-ion mode). A storage stage extends battery life while the battery is unused and on continuous charge. Bluetooth and VE.Smart networking Built-in Bluetooth gives quick setup, advanced configuration, monitoring and firmware updates through the VictronConnect app. VE.Smart networking links the charger with other Victron devices over Bluetooth, and the VE.Direct port connects to a GX device for system integration and the VRM portal. Quiet and durable The aluminium enclosure is rated IP43. There is no cooling fan, so operation is silent, with cooling by natural convection and full rated output up to 40°C ambient. The charger is protected against overheating, output short circuit and reverse polarity connection (internal fuse), and is up to 95% efficient on 230VAC. It is designed for permanent mounting using the flanges built into the heat sink. Features: 12V, 30A main output plus 4A starter battery output Two isolated outputs with integrated FET battery isolator Built-in Bluetooth with the VictronConnect app Adaptive 6-stage charge algorithm (3-stage for Li-ion) Suits flooded lead-acid, AGM, Gel and LiFePO4 batteries Automatic temperature compensation VE.Direct port and VE.Smart networking Remote on/off terminal and programmable relay IP43 aluminium enclosure, silent with no cooling fan 120-240VAC input, 45 to 65Hz Note: The AC power cord is not included. The charger has an IEC C14 inlet and the cord is ordered separately. DC cabling is not included. Output 12V, 30A (starter output 4A max, combined 30A) Outputs 2 isolated (1+1) AC Input 120-240VAC (85 to 250VAC, full power from 100VAC), 45 to 65Hz Max. Efficiency 95% (230VAC) / 93% (120VAC) Charge Voltage (Normal Mode) Absorption 14.4V, Float 13.8V, Storage 13.2V Max. Output Current (Low Current Mode) 15A Recommended Battery Capacity 120 to 300Ah lead-acid, 60 to 300Ah Li-ion Operating Temperature -20 to +60°C (full output up to 40°C) Enclosure Aluminium (blue RAL 5012) DC Connection Screw terminals 16mm² (AWG6) AC Connection IEC 320 C14 inlet with retainer clip (cord sold separately) Protection Category IP43 Weight 2.7kg Dimensions H x W x D (mm) 180 x 249 x 116

$573.87

Not all goods are kept in store; some come direct from the supplier so it could take multiple business days to arrive in store.

Click & collect: goods from JPW, RWB and Taylor Marine are typically ready in 2–5 business days. Goods from Sam Allen (east coast) are typically ready in 5–10 business days.

The Victron Smart IP43 Charger 12/30 (1+1) 120-240V is an adaptive, intelligent battery charger with built-in Bluetooth. It delivers up to 30A to a 12V battery from the main output, with a second isolated output of up to 4A for a starter battery. Two isolated outputs An integrated FET battery isolator and isolated outputs let one charger charge two separate batteries at different voltages or states of charge, with no current flow between them. The main output can supply the full rated current. The starter output is limited to 4A, and the combined current of both outputs is limited to the rated 30A. One charge algorithm applies to both outputs, so both batteries should be the same chemistry type. Adaptive 6-stage charging Microprocessor controlled adaptive charging optimises each recharge for the battery and the way it is used. Charge modes for flooded lead-acid, AGM, Gel and LiFePO4 batteries are selected with the MODE button on the charger or in the VictronConnect app, and charge voltage is compensated automatically for temperature (not needed in Li-ion mode). A storage stage extends battery life while the battery is unused and on continuous charge. Bluetooth and VE.Smart networking Built-in Bluetooth gives quick setup, advanced configuration, monitoring and firmware updates through the VictronConnect app. VE.Smart networking links the charger with other Victron devices over Bluetooth, and the VE.Direct port connects to a GX device for system integration and the VRM portal. Quiet and durable The aluminium enclosure is rated IP43. There is no cooling fan, so operation is silent, with cooling by natural convection and full rated output up to 40°C ambient. The charger is protected against overheating, output short circuit and reverse polarity connection (internal fuse), and is up to 95% efficient on 230VAC. It is designed for permanent mounting using the flanges built into the heat sink. Features: 12V, 30A main output plus 4A starter battery output Two isolated outputs with integrated FET battery isolator Built-in Bluetooth with the VictronConnect app Adaptive 6-stage charge algorithm (3-stage for Li-ion) Suits flooded lead-acid, AGM, Gel and LiFePO4 batteries Automatic temperature compensation VE.Direct port and VE.Smart networking Remote on/off terminal and programmable relay IP43 aluminium enclosure, silent with no cooling fan 120-240VAC input, 45 to 65Hz Note: The AC power cord is not included. The charger has an IEC C14 inlet and the cord is ordered separately. DC cabling is not included. Output 12V, 30A (starter output 4A max, combined 30A) Outputs 2 isolated (1+1) AC Input 120-240VAC (85 to 250VAC, full power from 100VAC), 45 to 65Hz Max. Efficiency 95% (230VAC) / 93% (120VAC) Charge Voltage (Normal Mode) Absorption 14.4V, Float 13.8V, Storage 13.2V Max. Output Current (Low Current Mode) 15A Recommended Battery Capacity 120 to 300Ah lead-acid, 60 to 300Ah Li-ion Operating Temperature -20 to +60°C (full output up to 40°C) Enclosure Aluminium (blue RAL 5012) DC Connection Screw terminals 16mm² (AWG6) AC Connection IEC 320 C14 inlet with retainer clip (cord sold separately) Protection Category IP43 Weight 2.7kg Dimensions H x W x D (mm) 180 x 249 x 116

TRUSTED FISHING & BOATING BRANDS

International Protective Coatings
Altex Coatings
Norglass
Diggers
Pacer Automotive
Septone
Mirka
Indasa
Unipro
3M
Dan Fender
IMAR
Ranex
Fixtech
Propspeed
Gulf Western Oil
Penrite
INOX
HoseCoil
Shurhold
JABSCO
Relaxn
Rule
Seaflo
Whale
Robline
Atlantic Trailer Winches
Axis Life Jackets
Shimano
Ronstan
Gill Marine
Delta Anchors
Fusion
Raymarine
GME
Delkor
iCom
Harden
Uniden
Yeti
NomadiQ
Oceansouth
Sicut
Victorinox
Dick
Vexed
Mustad
Nomad Design
Halco
Ocean's Legacy
Shogun
Daiwa
Insalt
Penn
Just Teak
Yamashita
Harimitsu
Surecatch
Jinkai
Black Magic
Sufix
Richter
Owner
Bassday
Kazura
Bird Busta

Continuously scrolling list of 66 trusted brands.